16 Appendix
606
Appendix
16
Status The result of the operation is indicated.
Completed .....The operation ended normally.
Busy...............The recipient is busy or did not answer.
Auto Send......The document is being re-sent and the set re-
send times has not been exceeded.
Canceled........The communication was terminated.
Check Remote Station ...
An error caused by the recipient or the line
during communication.
Send Again ... The document must be re-sent
because the re-send times have
reached the maximum due to a
transmission error.
Receive Again ... A polling request must be re-sent
due to a polling reception error.Or,
you must ask a sender to re-send
the document due to a reception
error.
Disconnected ...
Check that the line is properly connected.
When IP Fax (SIP) is used, check that the
network cable is properly connected.
XXX-XXX Error code
For more information on lines, refer to "2 Product Overview" >
"Machine Components" > "Telephone line connectors" in the User
Guide and for more information on XXX-XXX (error code), refer to
"Error Code" (P.410).
For more information on how to connect network cables, refer to
"Using the Ethernet Interface" (P.19) and for more information on
XXX-XXX (error code), refer to "Error Code" (P.410).
Total All pages received or sent are recorded.
Item Description
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
