1 Before Using the Machine
24
Before Using the Machine
1
Others
Always lock the wheels of this product after installation. Otherwise, it may fall over
or slide and cause injuries.
To bundle wires and cables, always use the cable ties and spiral tubes that Fuji
Xerox supplies. Otherwise, it may cause some defects.
To keep this product in a good performance and condition, always use it in the
following environment:
Temperature: 10 - 32°C
Humidity: 15 - 85%
When the product is left in a chilly room and the room is rapidly warmed up by
heater, dew condensation may form inside the product and cause a partial
deletion on printing.
To Next Page
Loading...
