Basic Operation
4
17
4 Basic Operation
Copying Procedure
This section describes the basic copy operations.
Step 1 Loading Documents
There are two methods of loading documents.
Document Feeder
z
Single sheet
z
Multiple sheets
Document Glass
z
Single sheet
z
Bound documents, such as books
Document Feeder
The document feeder supports single sheet and multiple sheet documents, with sizes
ranging from 148.6 × 210mm (A5, A5 ) to a maximum of 297 × 432mm
(A3, 11 × 17 inches).
1 Remove any clips and staples
before loading the document.
2 In the center of the document
feeder, set the document with the
side to be copied (top side if 2
sided document) facing upwards.
Note • The <Confirmation> indicator
lights when the document is
loaded correctly.
3 Adjust the movable document
guides to just touch the edge of the
document stack.
To Next Page
Loading...
