Fax Procedure
23
Basic Operation
4
3 Select the features to set from each
tab as necessary.
Step 3 Specifying the Destination
You can specify the recipient using the Phone Number, Address Number, or Group
Number method.
This section describes specifying a recipient using the numeric keypad.
1 Enter the fax number using the
numeric keypad.
2 To specify multiple recipients,
select [Next Recipient] on the touch
screen.
Note • If you enter an incorrect value,
press the <C> button and
enter the correct value.
Step 4 Starting the Fax Job
1
Press the <Start> button.
Important • When using the document
feeder, do not hold the
document while it is being fed
into the machine.
Note • If a problem occurs, an error
message appears on the
touch screen. Solve the
problem in accordance with
the message.
• You can set the next job during faxing.
123
456
789
0 #
C
Numeric keypad
123
456
789
0 #
C
<Start> button
To Next Page
Loading...
