Printer Connection and Software Installation 57
You can select a method to configure a wireless setting from the following:
Using the installer on the Software Pack CD-ROM (Windows Only) (Recommended for initial setup)
Refer to "
Launching the Printer Setup Screen" on page 71.
WPS-PBC ( (WPS) button)
*1
Refer to "WPS-PBC (WPS Button)" on page 58.
WPS-PBC (Operator Panel Menu)
*1
Refer to "WPS-PBC (Operator Panel Menu)" on page 59.
WPS-PIN
*2
Refer to "WPS-PIN" on page 59.
Auto SSID Setup
Refer to "
Auto SSID Setup" on page 60.
Manual SSID Setup
Refer to "
Manual SSID Setup" on page 61.
*1
: WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register
devices required for wireless configuration, by starting WPS-PBC on the printer with the (WPS)
button or operator panel menu, and then pressing the button provided on the wireless LAN access point
(Registrar) or router. This setting is available only when the access point supports WPS-PBC.
*2
: WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and
register devices required for wireless configuration, by entering PIN assignments in the printer and
computer. This setting, performed through access point, is available only when the access point of your
wireless router supports WPS.
To Next Page
Loading...
Need help?
General
