FujiFilm SP-3000 - Solenoid (S101) Replacement; Reading Head Opposite Roller Replacement

7-38
7.2 NC100AY Lower Feed Section
Removal
1. Remove the feed section unit
(See Subsection 7.2.1).
2. Place the feed section unit upside down and
remove the screw securing the solenoid.
3. Return the feed section unit and remove the
solenoid.
Installation
Installation is essentially in the reverse order of
removal.
Removal
1. Remove the feed section unit
(See Subsection 7.2.1).
2. Remove the two screws and then the leaf spring.
3. Remove the screw, then the roller assembly and
eccentric pin.
7.2.8 Solenoid (S101) Replacement
Z2307
Solenoid (S101)
Screw
7.2.9 Reading Head Opposite Roller Replacement
Z2308
Leaf Spring
Screws (2)
Z2309
Roller Assembly
Screw
Eccentric Pin
Distributed by minilablaser.com