265
Peripherals and Optional Accessories
10
External Flash Units
Setting
Description
B
Flash compen-
sation/output
The options available vary with fl ash control mode.
•
TTL: Adjust fl ash compensation (the full value
may not be applied if the limits of the fl ash con-
trol system are exceeded). In the cases of the
EF-X20, EF-20, EF-42, and EF-X500, the selected
value is added to the value selected with the
fl ash unit.
•
M/MULTI: Adjust fl ash output (compatible units
only). Choose from values expressed as fractions
of full power, from ⁄ (mode M) or ¼ (MULTI)
down to ⁄ in increments equivalent to ⁄ EV.
The desired results may not be achieved at low
values if they exceed the limits of the fl ash con-
trol system; take a test shot and check the results.
To Next Page
Loading...
