FujiFilm X-E3 - Sync Terminal

263
Peripherals and Optional Accessories
10
External Flash Units
SYNC TERMINAL
SYNC TERMINAL is dis-
played if the EF-X8 is low-
ered and either no  ash
unit, or an incompatible
 ash unit, is mounted on
the hot shoe.
ADJUST
END
M
ODE
SYNC TERMINAL
Setting
Setting
Description
Description
A
Flash
control
mode
Choose from the following options:
•
M: A trigger signal is transmitted via the hot shoe X con-
tacts when a picture is taken. Choose a shutter speed
slower than the sync speed; even slower speeds may
be required if the unit uses long fl ashes or has a slow
response time.
•
D (OFF): The trigger signal is disabled.
B
Sync
Choose whether the fl ash is timed to fi re immediately
after the shutter opens (H/1ST CURTAIN) or immediately
before it closes (I/2ND CURTAIN). 1ST CURTAIN is recom-
mended in most circumstances.