320
Technical Notes
12
Problem
Solution
The ash does
not fully light
the subject.
•
The subject is not in range of the ash: Position the
subject in range of the fl ash.
•
The ash window is obstructed: Hold the camera
correctly.
•
Shutter speed is faster than the sync speed: Choose a
slower shutter speed (
P
64, 72).
Pictures are
blurred.
•
The lens is dirty: Clean the lens (
P
280).
•
The lens is blocked: Keep objects away from the lens
(
P
49).
•
s is displayed during shooting and the focus frame
is displayed in red: Check focus before shooting
(
P
50).
Pictures are
mottled.
•
Shutter speed is slow and the ambient temperature is
high: This is normal and does not indicate a mal-
function.
•
Pixel mapping is required: Perform pixel mapping
using H IMAGE QUALITY SETTING> PIXEL
MAPPING (
P
130).
•
The camera has been used continuously at high tem-
peratures or a temperature warning is displayed:
Turn the camera off and wait for it to cool down
(
P
42).
To Next Page
Loading...
