FujiFilm X-E3 - Page 342

322
Technical Notes
12
Connections
Problem
Problem
Solution
Solution
The monitor is
blank.
The camera is connected to a TV: Pictures will be dis-
played on the TV instead of in the camera monitor
(
P
282).
No picture or
sound on TV.
•
The camera is not properly connected: Connect the
camera properly (
P
282).
•
Input on the television is set to “TV”: Set input to “HDMI”
(
P
282).
•
The volume on the TV is too low: Use the controls on
the television to adjust the volume.
Both the TV and
camera monitor
are blank.
The display mode selected with the VIEW MODE button
is EVF ONLY +
E: Put your eye to the viewfi nd-
er or use the VIEW MODE button to choose another
display mode.
The computer
does not recog-
nize the camera.
Be sure the camera and computer are correctly con-
nected (
P
287).
Cannot transfer
RAW or JPEG  les
to computer.
Use MyFinePix Studio to transfer pictures (Windows
only;
P
287).