100
5 Device
[IPsec Settings]
Sets to ensure safe communication by encrypting the network in packet units.
If the Wireless LAN Kit (optional) is installed, this item can only be specified for the primary network.
Check with the network administrator regarding [IKE Authentication Method], [Preshared Key], [DH
Group] and [PFS Settings].
Item Description
[IPsec Settings]/[IPsec Settings (Ethernet 1)]/[IPsec Settings (Wi-Fi)]
[IKE Authentication
Method]
Sets IKE authentication method.
[Preshared Key] Input preshared key.
Set when [IKE Authentication Method] is [Authenticate by
Preshared Key].
[Device Certificate] Sets certificate used in IPsec communication.
Set when [IKE Authentication Method] is [Authenticate by Digital
Signature].
Here, a self-signed certificate created with Internet Services cannot
be used.
[IPsec Communication] Enables IPSec communication.
[IKE SA Lifetime] Sets valid period of IKE SA.
[IPsec SA Lifetime] Sets valid period of IPsec SA.
[DH Group] Sets DH group.
[PFS Settings] Enables PFS.
[Destination IPv4
Address]
Sets IPv4 address or range of destinations for allowing
communication.
[Destination IPv6
Address]
Sets IPv6 address or range of destinations for allowing
communication.
[Communicate with
Non-IPsec Devices]
Enables communication with devices not supported by IPsec, at
addresses other than those set with the destination address.
To Next Page
Loading...
Need help?
General
