Fujitsu ApeosPrint C4030 - Page 17

17
2.2 Connecting to the Computer
2. Enter the required information and then tap on [OK].
3. Confirm that the settings updated and then tap on [Confirm].
The machine restarts and then the settings are enabled.

Manual Settings
1. Tap on [Manual Settings].
2. Set each item and tap on [OK].
Setting items Details
[SSID] Set the name that identifies the wireless network.
Alphanumerics up to 32 characters can be entered.
[Encryption Settings] Set the encryption method.
[No Encryption] No encryption is set.
[WEP] Up to 4 WEP keys can be registered. Select the WEP key to
be used from among them with the [Transmit Key] screen.
[WPA3 Personal] Set the passphrase.
[WPA2/WPA3 Personal]
[WPA2 Personal]
[WPA/WPA2 Personal]
[WPA2/WPA3 Enterprise] Set the authentication method.
If PEAP is selected, also set [Identity], [User Name] and
[Password].
When using EAP, it is necessary to set the certificate in
Internet Services and details for the authentication
method.
[WPA3 Enterprise]
[WPA2 Enterprise]
[WPA/WPA2 Enterprise]