Fujitsu ApeosPrint C4030 User Manual

97
5.5 [Network Settings]
[LDAP Server Settings]
Sets items such as the server and authentication method when LDAP authentication is used.
Connection with the server can be confirmed by tapping on [Connection Test].
[Domain Name] When using Active Directory of a Windows Server as the server, set
the domain name of Active Directory as the domain name.
Note

Be sure to set the domain name in all uppercase letters. An
authentication error will occur if set in lowercase letters.
[Server Certificate
Verification]
Server Certificate can be verified.
Item Description
[Primary Server Name/
Address]
Input server name or IP address of primary server.
[Primary Server - Port
Number]
Input port number of primary server.
[Secondary Server Name/
Address]
Input server name or IP address of secondary server.
Connects to substitute server when communication is down due to
primary server maintenance, etc.
[Secondary Server - Port
Number]
Input port number of secondary server.
Connects to substitute server when communication is down due to
primary server maintenance, etc.
[Authentication Method]
[Direct Authentication] Authentication for the LDAP server is performed with the entered
user ID and password.
[Authentication of User
Attributes]
Authentication for the LDAP server is performed based on specific
attribute information. This sets the attribute name for [Attribute of
Entered User Name].
[Attribute of Entered User
Name]
Sets attribute name when authentication method for LDAP
authentication is [Authentication of User Attributes].
Authentication for the LDAP server is performed based on specific
attribute information. This sets the attribute name for [Attribute of
Entered User Name]. For example, set “mail” to have users input
their Email address.
Note

Set an attribute that guarantees that each user is provided with a
unique value.
Item Description

Fujitsu ApeosPrint C4030 Specifications

General

Brand	Fujitsu
Model	ApeosPrint C4030
Category	Printer
Language	English