First-time se tup of yo ur d evice
Switching on the device for the first time
Switchingonforthefirst time
On devices with ON/OF F switch for wireless components: Slide the ON/OFF sw itch
for wireless components to the ON position before switching on the device.
When you switch on the device for the first time, the supplied software is
installed and configured. Because this procedure must not be interrupted,
you s hould set aside enough time for it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NO T restart the device unless
you are reque sted to do so!
To make it easier to use y
our device for the first time, the operating system
is pre-installed on th
e hard disk.
► Switch on your device.
► During installation, follow the instructions on screen.
If a Windows operating system is installed on your device, you will find more
information on the system and drivers, help programmes, updates, manuals etc. on
the device or on the Internet under "
http://www.fujitsu.com/fts/support /".
You can find information a nd help on the Windows operating system functions
on the Internet at "
http://windows.microsoft.com".
Fujitsu 17
To Next Page
Loading...
