Working with the notebook
Using the power-managem e nt features
PowerPowerBattery
The notebook uses less power when the available power-m anagemen t features are used. You
will then be able to work longer when using the battery before having to recharge it.
Power efficiency is increased and environmental pollution reduced. By
choosing the best power options, you can make significant savings and
at the s ame time help protect the environment.
When you close the LCD screen, depen ding on the setting in Windows, the
notebook au tomatically enters a power saving mode.
We recommend the following settings:
Function On external power On battery power
Turn off monitor After 10 minutes After 5 minutes
Turn off hard disk(s) After 15 minutes After 10 minutes
Energy saving (S3) After 20 minutes After 15 minutes
Hibernate mode (S
4)
After 1 hour After 30 minutes
► Select the power ma
nagement functions in your Control Panel.
► Select the Screen Saver in your Control Panel.
or
► Right-click on the desktop. Activate the screen saver by c licking on Personalize – Change
Screen Saver.
If you need further information about an option, you can get help w ith m ost
settings by pre ssing
F1
to open the Microsoft Help.
When the notebook is in power-saving mode, the following m ust be remembered:
During powe r saving mode, open files are held in the main memory
orinaswapfile on the hard disk.
Never turn off your note book while it is in a pow er saving mode. If the built-in ba ttery is
nearly empty, close the op en files and do no t go into power sa ving mode.
If you do not inten d to use your note book for a long period of time:
► Exit power saving mode if necessary via the mouse or k eyboard or by sw itching on the
notebook.
► Close all opened programs and completely shut down the notebook.
Fujitsu 37
To Next Page
Loading...
