EasyManua.ls Logo

Fujitsu CELSIUS H730 - Password Protection for Booting of the Operating System

Fujitsu CELSIUS H730
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Security functions
Deactivating hard disk protection
To ca ncel a password without setting a new one, proceed as follows:
Call up the BIOS Setup and select th e Security menu.
Mark the Hard D isk Security eld and press the Enter key.
In th e Dr ive0 area mark the Set Master Password eld and press the Enter key.
You will be initially reque sted to enter the old password by the Enter current Password prompt.
You will then be requested to enter a new password by the Enter new Password prompt.
After entering the password, press the Enter key three times.
Fr om the Exit menu, choose the option Exit Saving Changes.
Press the Enter k ey and select Yes.
The notebook reboots, and password protection for the hard disk is cancelled.
To cancel the password for the second hard disk (Drive1), go to the Drive1 area
and select the eld Set Master Password, then proceed in exactly the same way as
for cancelling the password for the rst hard disk (Drive0).
Password protection for booting of the operating system
With th e supervis
or HDD password you have set in the BIOS Setu p Utility (see
section ), you can
also prevent booting of the operating system.
Operating system
Activating system protection
Start the BIOS Setup Utility and go to the Security menu.
Operatingsy
stem
Select the PasswordonBootoption and press the Enter key.
Select the desired option (Disabled, First Boot or Every Boot) and press the Enter key
Select the Save Changes & Exit opt ion under Exit.
The n otebook will reboot. You will be promp ted to enter your password
(the supervisor HDD pa ssword).
Deactivating system protection
Start the BIOS Setup Utility and go to the Security menu.
Operati
ngsystem
Select the PasswordonBootoption and press the Enter key.
Select the Disabled option and press the Enter key.
If you do not want to change any o ther settings, you can exit BIOS Setup Utility.
Select the Save Changes & Exit opt ion under Exit.
The noteboo k will reboot. The system is no longer password-protected.
Fujitsu 49

Table of Contents

Related product manuals