Working with the notebook
Installing a module
2
► Place the module in
to the module bay so that th e contacts enter first.
► Push the module into the module bay until you feel it locking into place.
Optical drive
Opticaldrive
This product co
ntains a light emitting diode, classification according to IEC 60825
1:2007: LASER
CLASS 1, and must the refore not be opened.
Handling data carriers
Handling
Observe the
following guidelines when handling data carriers:
•Avoidtouc
hing the surface of a data carrier. Only handle data carriers by their edges.
• Always store data carriers in their cases. This will protect the da ta carrier ag ainst
being covered in dust, scratched or damaged in any other way.
•Protecty
our data carriers against dust, mechanical vibrations and direct sunlight.
• Avoid storing a dat a carrier in areas subject to high temperatures or humidity.
You may u
se both 8 cm / 3.15 inch and 12 cm / 4.7 inch data carriers in the optical drive.
When us
ing a data carrier of lesser quality, vibrations and reading errors may occur.
Fujitsu 33
To Next Page
Loading...
