Working with the no tebook
Removing a SIM card
► Prepare for removal of the SIM card, see chapter "Preparing to remove co mponents", Page 61.
2
1
a
► Pull the S IM card slider tray from the slot (1).
► Remove the SIM card (a) from the
SIM card s lider tray.
► Push the SIM card slider tray back
into the slot (2).
► C omplete the removal, see chapter "
Finishing component removal", Page 66.
Wireless LAN/Bluetooth/UMTS/LTE radio components
The installation of radio com ponents not approved by F ujitsu Technology Solutions
will invalidate the certifications issued for this device.
Switching the wireless components on and off
► Press the button to start the WirelessSelector.
The radio component indicator will be illuminated when one or more
radio com ponents is switched on.
If you switch off the radio components, the wireless LAN antenna and the
Bluetooth and UMTS/LTE module will also be switched off.
You can enable and disable the installed radio components individually
using the WirelessSelector programme
Pay a ttention to the additional safety notes for devices with radio compo nents
provided in the "Safe ty/Regulations" manual.
Details on using W ireless LAN can be found in the online help system
included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth soft ware.
You can o btain more information on UMTS/LT E from your service provider.
40 Fujitsu
To Next Page
Loading...
