Working with the no tebook
Module
ModulebayModules
The design of your notebook enables the flexible use of notebook batteries and drives. T he
following modules can be operated in the module bay of your notebook:
• Second battery
• Second hard disk d rive
• Optical drive
• Empty plug-in unit (save w eight)
Only use modules designed for your notebook.
Do not use force when installing or removing the module.
Make sure that no foreign objects e n ter the module bay.
You c an swap modules during operation. This means you do not
need to switch off the notebook.
Log o ff the module via the corresponding symbol in the task bar.
The module can now be removed without any furth er actions being necessary.
Removing a m odule
2
1
ModuleDriveWeigh tS
aver
► Slide the release mechanism (1) in the direction of the arrow and hold.
► Pull the module (2) out of the module bay.
32 Fujitsu
To Next Page
Loading...
