Working with the notebook
Manual removal (emergency removal)
CD/DVD:ManualremovalofdatacarrierEmergency r emovalof datacarrier
In the e ven t of a power failure or damage to th e drive, you can remove the data carrier manually.
1
2
► Switch your notebook off.
► Push a pen or a piece of wire (such as a
paperclip) firmly into the opening (1).
The drive tray is ejected. You can now pull
the drive tray (2) out of the drive.
Removing and fitting the dust removal cover
(ventilation slot cover)
In order to ensure optimum cooling of the components in your notebook, you
should periodica lly clean the ventilation slot of the heatsink.
This ensures optimum fan performance. You can achieve the best cleaning
results with a small hand-held vacuum cleaner.
If necessary, you can also use a dry brush to release dust from the ventilation slots.
Do not use any cleaning liquids! Ensure that no liquid enters the device.
To avoid overheating of the device, do not remove the ventilation slot
cover when the device is switched on.
► Prepare for
removal, see chapter "
Prep aring to remove components", Page 61 .
Fujitsu 35
To Next Page
Loading...
