Troubl esho ot ing and tips
The printer does not print
Printerdoe s notprint
Cause Troubleshootin g
The printer is not switched on. ► M ake sure that the printer is sw
itched
on and ready for operation (ref
er to the
documentation s upplied with t
he printer).
The printer is not connected c
orrectly.
► C heck that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is fa ulty o r n ot c orrectly
installed, or it is the wrong printer driver.
► C heck that the data cable connecting
the notebook to the printer is properly
connected.
► C heck whether the correct printer driver is
loaded (refer to the printer documentation).
The radio connectio
n to a network does not work
Theradioc onnecti
ontoa network doesnot w ork
Cause Troubleshootin g
The wireless compo
nent is disabled.
► Switch the radio component on (see
"
Switch ing the wi reless components on and
off", Page 40).
The w ireless component is enabled. Despite
this, the wireless c onnection to a network does
not work.
► C heck whether th e radio connection is
switched on via the software.
► Furt her information on using the radio
component can be found in t he help files.
SmartCard re
ader is not recognised
Cause
Troubleshooting
Chip card inserted incor rectly.
► Make sure yo
u have inserted y our
SmartCard i
nto the Smart Card reader with
the chip fa
cing upwards.
► C heck whether the SmartCard you are using
is supported. Your SmartCard must comply
with the ISO standard 7816-1, -2, -3 and -4.
SmartCard PIN forgotten
Cause
Troubl
eshooting
PIN forgotten ► If you work in a network, contact yo ur
system administrator, who can unlock your
Tablet PC with a s upervisor PIN.
Fujitsu 73
To Next Page
Loading...
