Working with the no tebook
CD/DVD indicator
CD/DVDindicator
The CD/DVD indicator flashes when a data carrier is inserted. T he indicator goes out when
the drive is ready for reading. The indicator lights up when the drive is being accessed.
You ma y only rem ove the data carrier when the indicator is unlit.
If the CD/DVD indicator does not go o u t aft er a data carrier has been inserted, but
instead cont inues to flash, this means that the drive cannot access the data carrier.
Either the data ca rrier is damaged or dirty or you are using a data
carrier that the drive cannot read.
Inserting or removing a data carrier
InsertingRemoving
The notebook must be switched on.
2
1
► Push the insert/eje ct button (1) .
The drive tray will open.
► Gently pull the drive tray (2) completely out.
► Place the da ta carrier in the drive tray with
the printed side facing upwards.
or
► Remove a data carrier that has
been inserted .
► Push in the drive tray until y ou
feel it lock into pla ce.
34 Fujitsu
To Next Page
Loading...
