Working with the notebook
Connecting the notebook to the Port Replicator
If you connect th e notebook to the Port Replicator during operation, problems can
occur. We recommend that you switch off the notebook beforehand.
The mains adapter must be conne cted to the Port Replicator when the
notebook is connected to the Port Replicator.
We recommend that the notebook is not operated with the LCD monitor closed when
the notebook is connected to the Port R eplicator. T he resulting overheating can
cause reduced performance and increased activity of the integrated fan .
PortReplic ato r
► Switch the notebook off.
► Remove the power plug of the m ains adapter from the mains socket.
► Disconnect the mains adapter cable from the DC socket (DC IN ) of the notebook.
1
► Position the notebook so that it is in line w ith the back edge of the Port Replica tor.
► Push the notebook onto the Port Replicator in the direction of the arrow
(1) until you notice it engage.
Fujitsu 43
To Next Page
Loading...
