Troubleshooting and tips
Error message/cause Resolution
Previous boot incomplete - Default configuration
used Due to an error during the previous system
boot, default values were used for certain
settings. Check the settings in the BIOS Set up.
► Press the
F1
function key when prom
pted
to do so .
Real time clo ck er ror
► Contact your sales outlet or
our customer
service c entre.
nnnnK Shadow RAM failed a
t offset: xxxx Failin g
Bits: zzzz
► Contact your sales outlet or our customer
service c entre.
System battery is dead - Replace and run SETUP
► Contact your sales outlet or our customer
service c entre.
System cache error - Cache disabled
► Contact your sales out
let or our customer
service c entre.
System timer error
► Contact your sales outlet or our customer
service c entre.
76 Fujitsu
To Next Page