Fujitsu DL3100 - Page 148

FUJITSU DL3100
C-8 User’s Manual
Function
Command
Select LQ ,NLQ or draft
ESC x (n)
Selects either LQ, draft or NLQ printing according to the
following values:
n = 0 Draft printing
1 Letter-quality printing
2 Near Letter-quality printing
Select Draft/Super Draft
ESC y (n)
Selects draft/super draft for ANK characters in
accordance with the value for n.
n = 00H draft setting
01H Super draft setting
Notes
• If super draft is specified draft (ESC x 0) should be
selected
Select user-defined set
ESC % (n)
Switches between normal and user-defined characters, as
follows:
n = 0 Normal (ROM) characters
1 User-defined (RAM) characters