3 Select the RAID group for the drive that was selected in Step 2 as the Dedicated Hot Spare. Click the
[Assign] button.
A confirmation screen appears.
4 Click the [OK] button.
The Dedicated Hot Spare is registered and the registration completion screen appears.
5 Click the [Done] button.
The screen display returns to the [Drives] screen.
Chapter 5
General Settings
5.7 RAID Configuration Settings
100
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0
To Next Page
Loading...
