Fujitsu ETERNUS DX100 S3 - Storage Management (Initial Setup 1)

Password: root (by default)
After logging in, the Initial Setup screen of ETERNUS Web GUI appears.
5.4 Storage Management (Initial Setup 1)
Perform the settings that are required before operation of the ETERNUS DX Disk storage system by using the
Initial Setup 1 screen of ETERNUS Web GUI.
Perform the following settings according to the wizard screen:
•
Set Storage System Name
•
Change User Password
•
Set Thin Provisioning
•
Register Advanced Copy License
•
Register SED Authentication Key
•
Set Network Environment
Chapter 5
General Settings
5.4 Storage Management (Initial Setup 1)
77
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0