Fujitsu ETERNUS DX100 S3 - Drive Enclosures; Front; Figure 1.5 Front View of a 2.5 Type Drive Enclosure; Figure 1.6 Front View of a 3.5 Type Drive Enclosure

9. Power supply unit (PSU#0)
10. Power supply unit (PSU#1)
1.2 Drive Enclosures
Drives and an operation panel are installed in the front of the drive enclosure. I/O modules and power supply
units are installed in the rear.
Three types of drive enclosures are available; a 2.5" type, a 3.5" type, and a high-density type.
1.2.1 Front
This section provides the names of the components in the front of a drive enclosure.
■
2.5" Type
Figure 1.5 Front View of a 2.5" Type Drive Enclosure
1
3 3
2
1.
Operation panel
2. 2.5" drive
3. Flange cover
■
3.5" Type
Figure 1.6 Front View of a 3.5" Type Drive Enclosure
1
3 3
2
1.
Operation panel
2. 3.5" drive
3. Flange cover
Chapter 1 Component Names
1.2 Drive Enclosures
21
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0