8.2.3.2 Disk Settings
After initialization is complete, create a file system in a disk with offline status.
■
Operation Disk Settings
The following procedure explains how to set up the operation disk.
1 Select [Disk Management] from [Computer Management].
2 On the [New Simple Volume Wizard] screen, click the [Next] button.
Chapter 8
SAN Connection Settings
8.2 Server Connection Setup
150
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0
To Next Page
Loading...
