10.3 Volume Check
On the [Volume Details] screen of ETERNUS Web GUI, the status of volumes that you have created is dis-
played. Check if volumes are set correctly.
To display the [Volume Details] screen, click the [Volume] tab on the navigation of the ETERNUS Web GUI
screen. In the [Volume (Basic Information)] screen that appears, select which volume to check the informa-
tion for and click the No. or name of this volume.
Chapter 10
System Status Check
10.3 Volume Check
170
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0
To Next Page
Loading...
