EasyManua.ls Logo

Fujitsu ETERNUS DX100 S3 - Default Chapter; About this Manual

Fujitsu ETERNUS DX100 S3
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Preface
Fujitsu would like to thank you for purchasing our FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage
system.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system is designed to be connected to Fujitsu
(SPARC M10, PRIMEQUEST, or PRIMERGY) or non-Fujitsu servers.
This manual describes all the procedures that are required to start operation of the FUJITSU Storage ETERNUS
DX100 S3/DX200 S3 Disk storage system.
This manual is intended for use of FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system in re-
gions other than Japan.
Please carefully review the information outlined in this manual.
Second Edition
February 2014
About This Manual
Organization
This manual is composed of the following eleven chapters:
"Chapter 1 Component Names" (page 18)
This chapter provides component names of the FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage
system.
"Chapter 2 Rack Installation" (page 26)
This chapter describes the procedure for installing the FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk
storage system in a rack.
"Chapter 3 Checking the Configuration Environment" (page 44)
This chapter describes the environment required for system configuration.
"Chapter 4 Connecting Cables" (page 54)
This chapter explains how to connect various cables to the FUJITSU Storage ETERNUS DX100 S3/DX200 S3
Disk storage system.
"Chapter 5 General Settings" (page 70)
This chapter describes the basic settings for the FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage
system.
"Chapter 6 Monitoring Settings" (page 101)
This chapter describes the settings required to monitor the FUJITSU Storage ETERNUS DX100 S3/DX200 S3
Disk storage system.
"Chapter 7 Power Control Setup" (page 121)
This chapter describes the settings required for power control of the FUJITSU Storage ETERNUS DX100 S3/
DX200 S3 Disk storage system.
"Chapter 8 SAN Connection Settings" (page 125)
This chapter describes the settings required to use the FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk
storage system with a SAN connection.
3
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0

Table of Contents

Other manuals for Fujitsu ETERNUS DX100 S3

Related product manuals