Fujitsu ETERNUS DX100 S3 - Chapter 10 System Status Check; Component Status Check

Chapter 10
System Status Check
Check the status of the ETERNUS DX Disk storage system on the ETERNUS Web GUI screen or ETERNUS CLI.
10.1 Component Status Check
The status of the ETERNUS DX Disk storage system can be checked by general status in the upper left of the
ETERNUS Web GUI screen.
When the general status image is " ", the ETERNUS DX Disk storage system is in normal status. When
the general status image is other than " " (" ", " ", etc.), an abnormality has been de-
tected in the ETERNUS DX Disk storage system. Check the status of each component on the [Storage] screen.
If there is a component in Warning or Error status, contact your sales representative or maintenance engi-
neer.
168
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0