EasyManua.ls Logo

Fujitsu ETERNUS DX100 S3 - Power Distribution Units (for Regions Other than EMEA&I); Power Distribution Units (1 U); Power Distribution Units (2 U); Figure 1.11 Power Distribution Unit for DX100 S3;DX200 S3 (AC200-240 V, 1 U 4 Outlets)

Fujitsu ETERNUS DX100 S3
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9. Fan expander module (FEM#0)
10. Fan expander module (FEM#1)
1.3 Power Distribution Units (for Regions Other than EMEA&I)
There are two sizes for power distribution units: 1U and 2U.
1.3.1 Power Distribution Units (1U)
The 1U power distribution unit has four outlets and two inlets.
1.3.1.1 Power distribution unit for DX100 S3/DX200 S3 (AC200-240V, 1U 4Outlets)
Figure 1.11 Power distribution unit for DX100 S3/DX200 S3 (AC200-240V, 1U 4Outlets)
3
2
1
1.
Main line switch
2. Outlet (OUTPUT)
3. Inlet (INPUT)
1.3.2 Power Distribution Units (2U)
2U power distribution units are available in two types: a 12 outlet type and a 16 outlet type.
1.3.2.1 Power distribution unit for DX100 S3/DX200 S3 (AC200-240V, 2U, 12Outlets)
There are 12 outlets.
Figure 1.12 Power distribution unit for DX100 S3/DX200 S3 (AC200-240V, 2U, 12Outlets)
2
1
1.
Main line switch
2. Outlet (OUTPUT)
Chapter 1 Component Names
1.3 Power Distribution Units (for Regions Other than EMEA&I)
24
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0

Table of Contents

Other manuals for Fujitsu ETERNUS DX100 S3

Related product manuals