(2) In the [Download MIB File] screen, set the required items and click the [Download] button.
Select the "The ServerView control code is added to the comment line of the MIB definition file"
checkbox when downloading the MIB file for monitoring the ETERNUS DX Disk storage system
by ServerView.
A confirmation screen appears.
(3) Click the [OK] button.
A dialog box to download the file appears.
(4) Click the [Save] button.
The MIB file is saved.
(5) Check the setting completion message and click the [Done] button.
The screen display returns to the [Network] screen.
Chapter 6
Monitoring Settings
6.2 Various Notification Settings
108
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0
To Next Page
Loading...
