Fujitsu ETERNUS DX100 S3 - Page 115

4 In [Action], click [Setup Remote Support].
The [Setup Remote Support] screen appears.
5 In the [Setup Remote Support] screen, set the items in [Customer Information] and [Communication
Environment Information].
6 Click the [Set] button.
A confirmation screen appears.
7 Click the [OK] button.
The remote support settings are applied.
8 Check the setting completion message and click the [Done] button.
The screen display returns to the remote support screen.
The specified information is sent to the remote support center and the connection of the ETERNUS DX
Disk storage system and the remote support center is checked.
The connection check result is sent to the e-mail address that is set in "Result notification information".
Chapter 6
Monitoring Settings
6.3 Remote Support Setup
115
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0