To use bidirectional CHAP authentication, the CHAP user name and password must be entered.
A confirmation screen appears.
4 Click the [OK] button.
The port parameter is set and the setting completion screen appears.
5 Click the [Done] button.
The screen display returns to the [iSCSI Port Group] screen.
Chapter 8
SAN Connection Settings
8.1 Connection Settings for the ETERNUS DX Disk Storage System
129
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0
To Next Page
Loading...
