(2) Select "Host Group" or "All" in "Target Connection".
To allow all of the hosts to recognize the LUN group, select "All".
• When "Host Group" is selected
Select a host group that is to be associated, and click the [OK] button.
• When "All" is selected
Select a host response and click the [OK] button.
(3) Click the [Browse] button in [CA Port Group].
A screen to select the CA port group appears.
(4) Select the CA port group that is to be associated and click the [OK] button.
The name of the selected CA port group is displayed in "CA Port Group".
(5) Click the [Browse] button in [LUN Group].
A screen to select the LUN group appears.
(6) Select the LUN group that is to be associated and click the [OK] button.
The name of the selected LUN group is displayed in "LUN Group".
4 Check the path between the host and the host interface port on the ETERNUS DX Disk storage system in
[Host — CA Port Connection], and click the [Create] button.
A confirmation screen appears.
5 Click the [OK] button.
The host affinity is created and the registration completion screen appears.
Chapter 8
SAN Connection Settings
8.1 Connection Settings for the ETERNUS DX Disk Storage System
133
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0
To Next Page
Loading...
