17 On the [iSCSI Initiator Properties] screen, confirm that [Status] has changed to [Connected].
18 In the same way, repeat Step 11 and later steps for the other target.
Initiator IP: IP address of the server (B in Figure 8.1)
Target portal IP: IP address of the ETERNUS DX Disk storage system (D in Figure 8.1)
Chapter 8
SAN Connection Settings
8.2 Server Connection Setup
142
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0
To Next Page
Loading...
