To send notification automatically when the usage rate exceeds the threshold, enable notification in
"6.1 Event Notification Setup" (page 101) and specify the notification method (email, SNMP, trap, or
Syslog).
4 In the confirmation screen, click the [OK] button.
Copy table size setting starts.
5 In the setting completion screen, click the [Done] button.
The screen display returns to the [Setting (Advanced Copy)] screen.
Chapter 9
Advanced Copy Settings
9.1 Advanced Copy Basic Settings
160
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0
To Next Page
Loading...
