4 Select the radio button of the volume that is to be used, and then click the [OK] button.
Select the "No.: 0, Name: main" volume.
5 In the same way as the copy source volume, click the [Browse] button of the copy destination volume.
Chapter 9
Advanced Copy Settings
9.2 Performing a Copy (SnapOPC+)
163
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0
To Next Page
Loading...
