Fujitsu ETERNUS DX100 S3 - Page 37

4 Install the drive enclosure in the rack.
Do
• When installing or removing the drive enclosure to or from the rack, make
sure that the sides and the bottom of the drive enclosure are held by two or
more people. Failure to do so may cause injury.
5 Fasten the drive enclosure in the rack.
Use four M5 screws to fasten it in the rack.
M5 screws
M5 screws
6 Attach the flange cover.
Chapter 2
Rack Installation
2.3 2.5" / 3.5" Type Drive Enclosure Installation (for Regions Other than EMEA&I)
37
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0