Refer to the manual that is provided with a power synchronized unit for details about connection
configurations with power synchronized units and required settings.
Power Synchronized Connections (Wake On LAN)
By using Wake On LAN, an instruction to power on the ETERNUS DX can be issued via the LAN.
"Magic packet" is sent by the utility software for Wake On LAN. The ETERNUS DX
detects this packet and the
power is turned on.
Figure 99 Power Supply Control Using Wake On LAN
Administration
Terminal
LAN
MN T
MN T
ETERNUS D
X
CM#0
CM#1
2
1
Powering on sequence
1 A power on instruction is issued to the
ETERNUS DX via the LAN.
2 ETERNUS DX startup
5. Connection Configuration
Power Synchronized Connections
202 Design Guide
To Next Page
Loading...
