Fujitsu ETERNUS DX100 S5 - Figure 174 Power Distribution Unit (AC16 A;200 V, 2 U, 16 Outlets); Table 96 Power Distribution Unit (AC16 A;200 V, 2 U, 16 Outlets) and Provided Power Cord Specifications

■
Power Distribution Unit (AC16A/200V, 2U, 16 Outlets)
There are 16 outlets.
Figure 174 Power Distribution Unit (AC16A/200V, 2U, 16 Outlets)
2
1
1
1 Main line switch
This turns on and off the power distribution unit.
2 Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
The specifications of a power distribution unit and the power cords that are provided are shown below.
Table 96 Power Distribution Unit (AC16A/200V, 2U, 16 Outlets) and Provided Power Cord Specifications
Item Specifications
Power Voltage AC 200 – 240V
Phase Single
Frequency 50Hz/60Hz
Input cable Connection type
Straight-through n NEMA L6-20P
Length 4m
Quantity 2
6. Hardware Configurations
Power Distribution Unit
276 Design Guide