Number of Processes That Can Be Executed Simultaneously
The following upper limits are applied to the number of processes that are to be executed.
• Only one process can be executed with Logical Device Expansion (LDE). Two or more processes cannot be
executed simultaneously in the same
ETERNUS DX.
• A total of 32 processes can be executed simultaneously for TPV balancing, FTRP balancing, RAID Migration,
Flexible Tier Migration, and Non-disruptive Storage Migration.
Capacity That Can Be Processed Simultaneously
The following upper limit is applied to the capacity of processes that are to be executed.
• A total capacity of 128TB can be processed simultaneously for TPV balancing, FTRP balancing, RAID Migration,
Flexible Tier Migration, and Non-disruptive Storage Migration.
Available Functions for Each Software
ETERNUS Web GUI, ETERNUS CLI, or ETERNUS SF software can be used to configure a NAS environment as well as
perform operation management settings. The operations that can be performed depend on the software that is
being used.
The following table shows the available functions for each software.
Table 128 Available Functions for Operation Management Interfaces
Function
ETERNUS Web
GUI
ETERNUS CLI
ETERNUS SF
Storage Cruiser
(Web Console)
(*1)
ETERNUS SF
AdvancedCopy
Manager (Web
Console) (*1)
ETERNUS SF
Express (Web
Console) (*1)
ETERNUS SF
(CLI)
NAS Interface
(NIC-CA)
Status display
¡ ¡ ¡
—
¡
´
Jumbo Frame Setting
´
¡
— — — —
Display
¡ ¡
— — — —
SMB Encryption Setting
¡ ¡ ¡
—
¡
´
Display
¡ ¡ ¡
—
¡
´
Access Based
Enumeration
(ABE)
Setting
¡ ¡ ¡
—
¡
´
Display
¡ ¡ ¡
—
¡
´
Large MTU Setting
´ ´ ´
—
´ ´
Display
´ ´ ´
—
´ ´
Transfer rate/
mode
Setting
´
¡
— — — —
Display
¡ ¡
— — — —
Volume Creation
¡ (*2) ¡
´
—
´ ´
Display
¡ ¡ ¡
—
¡
´
Expansion
¡ ¡ ¡
—
¡
´
B. Function Specification List
Available Functions for Each Software
327 Design Guide
To Next Page
Loading...
