Fujitsu ETERNUS DX100 S5 - Power Synchronized Unit; Figure 175 Power Distribution Unit (AC24 A;200 V, 2 U, 16 Outlets); Table 97 Power Distribution Unit (AC24 A;200 V, 2 U, 16 Outlets) and Provided Power Cord Specifications

■
Power Distribution Unit (AC24A/200V, 2U, 16 Outlets)
There are 16 outlets.
Figure 175 Power Distribution Unit (AC24A/200V, 2U, 16 Outlets)
2
1
1
1 Main line switch
This turns on and off the power distribution unit.
2 Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC
output cable).
The specifications of a power distribution unit and the power cords that are provided are shown below.
Table 97 Power Distribution Unit (AC24A/200V, 2U, 16 Outlets) and Provided Power Cord Specifications
Item Specifications
Power Voltage AC 200 – 240V
Phase Single
Frequency 50Hz/60Hz
Input cable Connection type
Straight-through n NEMA L6-30P
Length 4m
Quantity 2
Power Synchronized Unit
A power synchronized unit detects changes in the AC power output of the Uninterruptible Power Supply (UPS)
unit that is connected to the server and automatically turns on and off the
ETERNUS DX.
For more details about power synchronized units, refer to "Configuration Guide (Power Synchronized Unit)".
6. Hardware Configurations
Power Synchronized Unit
277 Design Guide