Fujitsu ETERNUS DX100 S5 - Figure 183 Installation Diagram for 2.5 Drives

■
Installation Order for 2.5" Drives
The installation priority order for 2.5" drives is shown below.
1 2.5" SSDs (800GB)
2 2.5" SSDs (960GB)
(Value SSDs)
3 2.5" SSDs (1.92TB) (Value SSDs)
4 2.5" SSDs (3.84TB) (Value SSDs)
5 2.5" SSDs (7.68TB) (Value SSDs)
6 2.5" SSDs (15.36TB) (Value SSDs)
7 2.5" SSDs (30.72TB) (Value SSDs)
8 2.5" self encrypting FIPS SSDs (1.92TB) (Value SSDs)
9 2.5" self encrypting FIPS SSDs (3.84TB) (Value SSDs)
10 2.5" self encrypting FIPS SSDs (7.68TB) (Value SSDs)
11 2.5" SAS disks (300GB/15krpm)
12 2.5" SAS disks (600GB/15krpm)
13 2.5" SAS disks (900GB/15krpm)
14 2.5" SAS disks (300GB/10krpm)
15 2.5" SAS disks (600GB/10krpm)
16 2.5" SAS disks (1.2TB/10krpm)
17 2.5" SAS disks (1.8TB/10krpm) (Advanced Format)
18 2.5" SAS disks (2.4TB/10krpm) (Advanced Format)
19 2.5" FIPS SAS self encrypting disks (1.2TB/10krpm)
According to the installation order, install drives in the slots of a drive enclosure from Slot#0 to Slot#23 in
ascending order.
Figure 183 Installation Diagram for 2.5" Drives
Slot#8 Slot#9
Slot#10 Slot#11 Slot#12 Slot#13 Slot#14 Slot#15
Slot#0 Slot#1 Slot#2 Slot#3 Slot#4 Slot#5 Slot#6 Slot#7
Slot#16 Slot#17 Slot#18 Slot#19 Slot#20 Slot#21 Slot#22 Slot#23
6. Hardware Configurations
Installation Conditions and Installation Rules
293 Design Guide