Fujitsu ETERNUS DX100 S5 - List of Target Pools and Volumes for each Function; Target RAID Groups;Pools of each Function; Table 124 Target RAID Groups;Pools of each Function

List of Target Pools and Volumes for Each Function
The following section shows the functions which can be performed on RAID groups, REC Disk Buffers, and pools.
The functions described in this section include functions that can be performed on RAID groups which comprise
REC Disk Buffers and pools.
Target RAID Groups/Pools of Each Function
Table 124 Target RAID Groups/Pools of Each Function
Function RAID group REC Disk Buffer SDP TPP FTRP (*1) FTSP (*1)
Components Standard, SDV,
WSV
— SDPV TPV FTSP FTV
Max. number DX60 S5 48 — 1 48 — —
DX100 S5 72 — 1 72 30 72
DX200 S5 132 Up to two can be
specified per REC
Buffer
1 132 30 132
DX500 S5 288 1 256 (*2) (*3) 60 256 (*2)
DX600 S5 528 1 256 (*2) (*3) 64 256 (*2)
DX900 S5 1,152 Up to four can be
specified per REC
Buffer
1 256 (*2) (*4) 64 256 (*2)
Create
¡ ¡
— (*5)
¡ ¡ ¡
Delete
¡ ¡
— (*6)
¡ (*7) ¡ (*7) (*8)
— (*8)
Rename
¡ ¡
´
¡ ¡ ¡
Expand capacity
¡ (by LDE)
´
¡ (by adding
an SDPV)
¡ (by adding
a RAID group)
△ (by adding
a child pool)
¡ (by adding
a RAID group)
Format (all area)
´
¡
´
¡ ¡
— (*9)
Format (unformatted area)
´ ´ ´
¡ ¡
— (*9)
Modify threshold
´ ´
¡ (threshold
can be set
with the
"Modify RAID
Group
Parameters"
function)
¡ ¡
— (*9)
Eco-mode setup
¡
´ ´
¡
´ ´
Switch controlling CM
¡ ¡ (*10) ¡ (*10) ¡ (*10)
—
´
Allocate REC Disk Buffer
´
¡
´ ´ ´ ´
Key management server
linkage
¡ ¡ (*10) ¡ (*10) ¡ (*10)
—
¡ (*10)
¡: Possible ´: Not possible —: N/A
*1 : Only ETERNUS SF Storage Cruiser can perform operations on FTRP and FTSP.
*2 : The maximum total number of TPPs and FTSPs.
B. Function Specification List
List of Target Pools and Volumes for Each Function
322 Design Guide