Fujitsu ETERNUS DX100 S5 - Table 9 SAN Functions

Overview Function
Supported model
DX60 S5
DX100 S5
DX200 S5
DX500 S5
DX600 S5
DX900 S5
Environmental burden reduction
Functions that adjust the operating
time and the environment of the
installation location in order to reduce
power consumption.
"Eco-mode" (page 93)
"Power Consumption Visualization
" (page 96)
¡ ¡ ¡
Operation management (ETERNUS DX
monitoring)
Functions that reduce load on the
system administrator, and that improve
system stability and increase operating
ratio of the system.
"Operation Management Interface" (page 97)
"Performance Information Management
" (page
98)
"Event Notification" (page 100)
"Device Time Synchronization" (page 102)
¡ ¡ ¡
Power control
Functions that are used to link power-
on and power-off operations with
servers and perform scheduled
operations.
"Power Synchronized Unit" (page 105)
"Remote Power Operation (Wake On LAN)
"
(page 106)
¡ ¡ ¡
• High-speed backup
• Continuous business
Data can be duplicated at any point
without affecting other operations.
"Backup (SAN)" (page 108)
¡ ¡ ¡
Performance tuning
Functions that can perform tuning in
order to improve performance.
"Assigned CMs" (page 121)
"Striping Size Expansion
" (page 122)
¡ ¡ ¡
Simple configuration
A wizard that simplifies the
configuration of Thin Provisioning.
"Smart Setup Wizard" (page 123)
¡ ¡ ¡
Environmental friendliness
The ETERNUS DX complies with RoHS, as mandated by the European Parliament and
Council. RoHS limits the use of specific chemicals in electrical and electronic equipment.
¡ ¡ ¡
¡: Supported ´: Not supported
*1: This is not supported in the ETERNUS DX100 S5 (DC power type).
Table 9 SAN Functions
Overview Function
Supported model
DX60 S5
DX100 S5
DX200 S5
DX500 S5
DX600 S5
DX900 S5
Operations optimization
(Deduplication/Compression)
A function that eliminates duplicated
data and compresses the data to
reduce the amount of written data.
"Deduplication/Compression" (page 128)
´
¡ (*1) ¡ (*2)
1. Overview
Function Specification List
30 Design Guide