ETERNUS DX60 S5
This section provides the storage system specification of the ETERNUS DX60 S5.
Table 1 Specifications (ETERNUS DX60 S5)
Item ETERNUS DX60 S5
Physical capacity (max.) (*1) SAS disks 230TB
Nearline SAS disks 1,344TB
SSDs (*2) 30.7TB
Number of controllers 1 / 2
System memory capacity 8GB / 16GB
Host interface FC (16Gbit/s)
FC (8Gbit/s)
iSCSI (10Gbit/s, 10GBASE-T)
iSCSI (1Gbit/s, 1000BASE-T)
SAS (12Gbit/s)
Number of host interface adapters 1 / 2
Number of host interface ports FC 2 / 4
iSCSI 2 / 4
SAS 2 / 4
Number of drive enclosures 2.5" type drive enclosures 0 – 3
3.5" type drive enclosures (*3) 0 – 3
High-density drive enclosures 0
Number of drives 2 – 96 (*4)
Drive capacity (rotational speed) (*5) 2.5" SAS disks 300GB, 600GB,1.2TB, 1.8TB, 2.4TB
(10,000rpm)
300GB, 600GB, 900GB (15,000rpm)
2.5" SSDs 960GB, 1.92TB, 3.84TB
3.5" SAS disks 1.2TB, 2.4TB (10,000rpm)
3.5" Nearline SAS disks 4TB, 6TB, 8TB, 10TB, 12TB, 14TB (7,200rpm)
3.5" SSDs 960GB
Drive interface (maximum transfer rate) SAS (12Gbit/s)
*1: Physical capacity is calculated based on the assumption that 1TB=1,000GB and 1GB=1,000MB.
*2: This value indicates the maximum physical capacity when 2.5" SSDs are installed.
The value changes to 7.7TB when 3.5" SSDs are installed.
*3: Maximum number of drive enclosures when 3.5" type controller enclosures are installed.
*4: The number of SSDs is 2 to 8.
*5: For details, refer to "
■ Drives" (page 272) in "Component" (page 270).
1. Overview
Product Lineup
21 Design Guide
To Next Page
Loading...
