Fujitsu Eternus DX600 S3 - Figure 1.6 PFM; Table 1.2 Status and Meanings of each LED (PFM)

LED name LED status Meanings
MAINTENANCE
(green)
Maintenance for the ETERNUS DX is in progress.
(blinks green)
Maintenance or a status check via ETERNUS Web GUI or ETERNUS
CLI is necessary for the ETERNUS DX maintenance.
CACHE
(green)
There is data in the cache memory of the ETERNUS DX.
READY
(green) (*1)
The ETERNUS DX is available for use.
REMOTE
(green)
The ETERNUS DX is turned on and off with the server.
*1: When the READY LED and the FAULT LED are both on at the same time, an error has occurred while the
Unified configuration is starting up.
■
PCIe Flash Module (PFM)
A PFM is a module that is installed to operate the Extreme Cache function.
A PFM has LEDs.
Figure 1.6 shows the PFM. Table 1.2 shows the status and meanings of each LED.
Figure 1.6 PFM
1
2
1.
READY LED
2. FAULT LED
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 1.2 Status and Meanings of Each LED (PFM)
LED name
LED status Meaning
READY
(green)
The PFM is in normal status.
(blinks green)
The PFM is busy or temporarily unavailable.
FAULT
(amber)
The PFM is in error status.
Chapter 1 Component Name/LED Name
1.1 Controller Enclosures
16
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-7742-04ENZ0